Care Guide

Garments made from high-performance stretch fabrics are engineered to combine elasticity, compression, and lightness. Their ability to recover shape and maintain surface quality depends on controlled care over time.

Daily use introduces friction, sweat, and repeated handling. While these materials are designed for performance, their structure remains sensitive to prolonged exposure to water, heat, and chemical agents. A consistent care routine preserves both function and appearance.

After Use

The fabrics are designed not to retain dirt or sweat.
In most cases, a quick rinse in cold water is sufficient to refresh the garment and maintain its performance.

Allowing residues to remain over time may affect elasticity and surface quality, so rinsing shortly after use is recommended.

Washing

Hand wash in cold water using a mild detergent.

Keep the process short and controlled. These fabrics respond best to minimal handling and limited contact with water.

Avoid bleach, chlorine, and aggressive detergents, as they can alter both elasticity and color.
Check your detergent composition carefully. Some products contain hidden chlorine-based agents or optical additives that may not be immediately obvious but can damage fibers and affect color stability.

If machine washing is necessary, use a delicate, low-temperature cycle and place the garment in a protective laundry bag. Short cycles are preferable.

Soaking, Color Bleed, and Dye Migration

Do not soak the garment.

Prolonged immersion in water, especially with detergent, places unnecessary stress on elastane fibers and will gradually reduce their ability to recover. Maintaining brief contact with water helps preserve stretch, shape, and surface quality.

Soaking also increases the risk of color bleed. Excess dye that is normal on the first wash and it is stable within the fabric can begin to release when left in water for extended periods. This may result in fading or transfer onto lighter areas of the same garment or onto other items.

Dye migration refers to the movement of color within dyed fabrics under prolonged moisture, heat, or chemical exposure. This can subtly alter tone uniformity or create unwanted shifts in color.

Printed fabrics behave differently. The print does not migrate within the material, but improper care can still affect its appearance. Extended soaking, heat, or aggressive detergents may lead to surface bleed, loss of sharpness, or reduced contrast.

All fabrics used are OEKO-TEX® certified and tested for color fastness and stability. Under correct care, bleeding is not expected. Any color release occurs as a result of improper handling, most commonly prolonged soaking, excessive heat, or the use of aggressive detergents.

For this reason, washing should remain brief and controlled.
Rinse, wash gently, and remove from water without delay.

Drying

Do not wring or twist.
Press gently to remove excess water.

Allow to dry naturally, either flat or hung in a well-ventilated space. Avoid direct heat sources and prolonged sun exposure, as both can weaken elasticity and affect color over time.

General Care

These fabrics combine technical performance with a refined surface. Preserving this balance requires a measured approach.

Printed materials benefit from careful handling to maintain their depth and clarity. Avoid abrasion, excessive heat, and unnecessary exposure to water.

Mesh and lightweight constructions are designed to remain responsive and stable. With controlled washing and minimal immersion, they will retain their intended fit and performance over time.